Anchor impellers

Anchor Impellers

 

 

Low Clearance Impellers

  • The anchor impeller and the helical impeller are the two commonly used close clearance impellers.
  • The diameter of the close clearance impellers is typically 90 – 95 percent  of the inside diameter of the vessel.
  • The shear near the vessel wall reduces the build up of stagnant material and promotes treat transfer.
  • The anchor impeller is a radial flow impeller
  • Helical impeller provides axial discharge of material by producing strong top to bottom motion
  • Anchor blades may be used in combination with other types of impellers

 

Related Links

  • Marine Propeller - In a theoretical environment, one full revolution would move the liquid longitudinally a fixed distance depending upon the of inclination of propeller blades…Read more
  • Pitched Blade Turbine – Impeller Diameter – 450 mm to 3000 mm,Hub with even number of blades are mounted at an angle of 10° to 90° with respect to the horizontal…Read more
  • Hydrofoil ImpellersHigh efficiency impellers designed to maximize fluid flow and minimize shear rate. 3 or 4 tapering twisted blades…Read more
  • Radial Flow Impeller – The impeller blade is parallel to the axis of the impeller,Radial flow impeller discharges flow along the impeller radius…Read more
  • Rushton TurbineThe Rushton turbine is a disk type (six blade turbine) radial flow impeller,The diameter of the disk ranges from 66 to 75 percent of the internal vessel diameter…Read more
  • Open Blade Turbine – In open blade turbine, the blades are directly mounted on the hub…Read more
  • High Shear Impeller - Used for application such as grinding, dispersing pigments and making emulsions…Read more