Hydrofoil Impeller - Unimix Equipments Pvt Ltd


Hydrofoil Impeller

High efficiency impellers designed to maximize fluid flow and minimize shear rate.

3 or 4 tapering twisted blades, cambered and sometimes provided with rounded leading edges.

The blade angle at the tip is lower than that at the hub. Resultant flow is streamlined. Vertices around the impeller are lower. Lower power number than PBT.

The solidity ratio is the ratio of the total blade area to a circle circumscribing the impeller.

Low solidity ratio – Liquid blending and solid suspensions.

Higher solidity ratio – Axial flow patterns as the viscosity increases.  In gas-liquid dispersions wide blades provide an effective area of preventing bypass of gas through the impeller hub.

Myths about Hydrofoil Impellers

Related Links

  • Marine Propeller - In a theoretical environment, one full revolution would move the liquid longitudinally a fixed distance depending upon the of inclination of propeller blades…Read more
  • Pitched Blade Turbine – Impeller Diameter – 450 mm to 3000 mm,Hub with even number of blades are mounted at an angle of 10° to 90° with respect to the horizontal…Read more
  • Radial Flow Impeller – The impeller blade is parallel to the axis of the impeller,Radial flow impeller discharges flow along the impeller radius…Read more
  • Rushton TurbineThe Rushton turbine is a disk type (six blade turbine) radial flow impeller,The diameter of the disk ranges from 66 to 75 percent of the internal vessel diameter…Read more
  • Open Blade Turbine – In open blade turbine, the blades are directly mounted on the hub…Read more
  • Anchor Impeller - The Low Clearance Impellers:Anchor Impeller and the helical impeller are the two commonly used close clearance impellers…Read more
  • High Shear Impeller – Used for application such as grinding, dispersing pigments and making emulsions…Read more